The BLUE ENERGY AC/ Refrigeration pre- cooling mist system is the most effective heat exchange pre- cooling system on the market. It not only chills the air around the systems, but it also humidifies the tubes with the chilled water vapor, presenting the fastest heat exchange method possible. This system shows better results than other pre-cooling systems, and it can be used in both dry and humid conditions. As the tubes come into the contact with the water, our engineers predicted a serious corrosion problem with the tubes. Two years of studies and investigations were needed to elaborate to secure a cost effective solution to this problem. Only after an appropriate solution was found, did we start to work on the remaining system elements.
Note: Currently the longest functioning system (four years) that we installed has relatively hard water, but still after four years the limestone has still not formed in the system. The system still works as efficiently as it did on the first day of operation.
Still, a real challenge was to create a financially viable supplying system so that this method could work in combination with the small amount of water, which is used in our AC Pre-coolers. This was achieved with our partner – Chemical Corp – a leading company in industrial water treatment. We combine patented slow output technology – with a new low capacity supplying system, which was developed by Blue Energy. This patented system allows a precise amount of additive to be added to the water. To effectively prevent the limestone formation, there is a corrosion oppressive system built in, which helps to protect the tubes from water minerals.
Note: In many cases, the tubes eventually become cleaner than before because the treated water will easily be able to flush the tubes. The water will flush out the salt, the dust and other substances, which could accumulate and could impede the air stream and heat transfer.
To make sure that limestone or corrosion does not form on your tubes, we supply maintenance programs for all our systems as well. In this way, we may test and fill repeatedly the water treatment system, when there is a need, as well as check the system and the tubes, making sure that everything works in a correct way to achieve the maximum benefits.
BLUE ENERGY Technology
Usually innovations appear when an approved technology is used in a way that no one could imagine it up until now. BLUE ENERGY Technology is one such innovation. BLUE ENERGY Technology is based on diffusion. BLUE ENERGY is a spare plate, which will provide a safe and controllable limestone/corrosion oppressive substance inflow, in the cooling systems during the period of 30- 90 days.