How does it work

At the heart of the functioning of the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™ is an adiabatic process – a process in which a substance changes its state (moisture evaporates), and the result is a decrease in temperature. This effect is used to cool the air entering the air conditioning and cooling unit. Accordingly, the lower the temperature of the air entering the unit, the less power it requires to cool to a predetermined temperature.

The adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” is installed before the condenser of the air conditioning and cooling unit. The temperature of air passing through the panel is reduced because warm air is cooled by water mist created before air conditioning and cooling facilities.

ventilators_small_en

 

A schematic example of work of the adiabatic , evaporative cooling panel Blue Energy “Smart cooling™”.

Temperature of the air passing through the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” reduces substantially (by 10 – 20°C). And such lowering of temparature cause meaningfull cooling capacity increase.

Using the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” the temperature of the air entering the air conditioning and cooling unit can be reduced even till 20°C. It means that at a temperature like this the unit must expend much less power for cooling. See the example below.

Industrial cooling capacity and energy consumption, adiabatic (evaporative) panel

Get an offer

To cool the air entering the air conditioning and cooling unit, the processed water mist is created. After contact of the mist with hot air, evaporation occurs and as a result, temperature decreases.

Adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” does not directly affect the technical processes of air conditioning and cooling unit. It only provides a temperature reduction of the air entering the unit. This allows you to return the work of air conditioning and cooling unit from high speed into normal mode and provide the required cooling capacity.

The use of the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” provides, in addition to the above, a number of additional benefits that improve the cooling effect and ensure optimum use of air conditioning and cooling unit:

  • Membranes
    In our panel the special membranes are used that reflect the sun rays, protecting the coil and condenserof air conditioner. As a result, an additional increase in temperature of the air entering the air conditioning and cooling unit is avoided.
  • Micronozzle panel
    For producing water mist a special system Smart release technology is used that allows you to spray water droplets into very small particles. This provides substantial savings in water consumption.
  • No risk of calcium deposition
    The water which is sprayed as mist to reduce the temperature of the air entering the air conditioning and cooling unit is processed with special biochemistry (as pills). The biochemistry added into water is an essential element that changes the molecule of plaque. Due to this, the plaque and corrosion are not formed on surfaces of air conditioning and cooling unit (when using the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” only negligible amounts of water hits the surface of the unit). Using biochemistry ensures that the product is 100% environmentally friendly.
  • The risk of condenser overheating is eliminated
    Avoid risk of cooling and conditioning equipment overheating. As adiabatic, evaporative cooling panel reduces air temperature, that flows into cooling and conditioning unit thus reducing energy needed to produce necessary amount of cooling power, there is practically eliminated risk of equipment overheating what can cause huge damage for equipment. After adiabatic panel installation cooling and conditioning units are no more working on full power to produce necessary amount of cooling energy. Adiabatic pre-cooling panel Blue Energy is compatible with air conditioning and cooling units of any manufacturer. It operates completely independently of the technological processes of the unit, providing only cooling of entering air.
  • Compatible with all conditioning and cooling units
    The panel Blue Energy is compatible with air conditioning and cooling units of any capacity. Due to a special module assembly, the installation of the adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” occurs in one day. If the problem of the lack of capacity of air conditioning and cooling is expected in the nearest future or is relevant at the point, you already have a prompt solution!
  • Minimum maintenance
    Easy and economical maintenance. The only action you should do is the monthly replacement of biochemistry (pills) that takes up to 5 minutes. It can be done both by a service company and a trained staff member.
  • No Legionella risk
    There is no risk of the presence of Legionella (Leģionellas), because the adiabatic, evaporative cooling panel Blue Energy “Smart cooling ™” is equipped with UV lamps, which prevent bacteria entering the water (including Legionella).

The principle of adiabatic, evaporative cooling is described by ID diagram (see below):

Principle of adiabatic (evaporative) cooling, industrial energy saving

Adiabatic (evaporative) panel components

Adiabatic, evaporative cooling panel Blue Energy “Smart cooling™” consists of the following components:

  • The pumping station,
  • Panels with reflective membranes,
  • Water-spraying system,
  • Water treatment system,
  • Control Panel, which provides automatic startup of the system at a certain temperature.

To verify the effectiveness of our technology, we offer:

– Read the reviews of our customers. If necessary, we also offer direct contact,

– See the photos where the temperature of the air incoming to conditioning and cooling unit is displayed before and after the adiabatic, evaporative cooling panel Blue Energy “Smart cooling ™”.

– Familiarize with the principle of operation of the system by viewing the video,

– Read the results of scientific studies that confirm the effectiveness of the system,

– See how Facebook is using this technology for the units that cool its data centre.

Get an offer

  • Technology approved by all leading manufacturers:

    york trane rhoss quay logo_guntner logo_al daikin carrier airwell lennox

  • Contact us:

    Please fill in this form

    Company*

    Name*

    Email*

    Phone

    Your Message

  • Our product brochure

    brochure

    Email *

  • Our customer reviews and case studies

    global_partnerSchneieder Electric logo

    Products ensured for Lexel factory
    Results: Energy consumption reduced by 31%, cooling capacity raised by 22%
    ROI = 7 month

    Read more…

    global_partner

    PMI-logo

    Products ensured for Philip Morris factory, Intertaba, Italy
    Results: Energy consumption reduced by 37%, cooling capacity raised by 35%
    ROI = 5 month

    Read more…

  • Contacts

     

    Export Manager: Ugis Ava
    Cell Phone: +371 2000 9349
    E-mail: export@blue-energy.us
    Skype: ava.ugis1
    Blue Energy International, LLC
    Registration #LV40103333303
    Ikšķiles Street 4
    Ogre, LV5001
    Latvia